Elite Acoustics "EAE" D6-58 120 Watt Rechargeable Acoustic Guitar/Multi-Chan Amplifier with LFP Battery and Bluetooth - with 6 channel Digital Mixer
139900
Elite Acoustics "EAE" D6-58 120 Watt Rechargeable Acoustic Guitar/Multi-Chan Amplifier with LFP Battery and Bluetooth - with 6 channel Digital Mixer
139900
Elite Acoustics EAE D6-58 120 Watt Rechargeable Acoustic Guitar and Vocal Amplifier is the flagship product of our Acoustic Amplifier Line. a full featured programmable Digital Mixer with Effects and Color Display. A highly intuitive UI with extensive dedicated parameter control empowers any discerning artist to unleash superb performances in any venue. The powerful 32-bit DSP engine provides a compressor, gate, mid sweepable EQ, high Pass Filter, Notch Filter, Phase reverse to each of the 4 Class-A solid-state Mic pre-amps. Builtin 11000mAh Lithium Ion Phosphate (LifePO4) battery for longer playtime and fast charging time.
Available in wood or black finishes.
D6-58 features
- 120 Watt total
- 6-Chan Full Function Digital Mixer & Effects
- 10 user scene memories
- 2 High Z (1M ohm), 4 Mic and 6 Line inputs
- +48V Phantom Power for all 4 MIC inputs.
- Independent Effects on each channel
- Noise Gate, Compressor, EQ, Reverb, Chorus, & more
- Max 4 seconds of Delay can be used as insert into one channel at a time.
- Bluetooth for Streaming
- High-efficiency Class D amplifier with Active crossover
- 8″ woofer, 5 1/4” mid & 2 x 1” inch tweeters
- Monitor section; 3-band EQ, Monitor Volume,
stereo AUX input with level control - Chan 1/2 Direct Out
- Main-Mix Left/Right Output
- Plywood Cabinet
- Metal chassis
- Panel-mounted POTs/Jacks
- 11000mAh Lithium iron phosphate (LifePO4) battery
- Super Fast Charging
- 12V AC supply/ Battery Charger included
- Up to 4-6 hours of play time
- Unit weight- 28 LBs
- Standard 35mm built-in pole mount
- Designed and assembled in USA
Dimensions: 15.30”WX13.1”Hx9.80”D
Weight: 28 lbs
- Carrier Bag and Foldable Tile Support are sold separately.
How to save and recall/Load Scenes.
a. Save –
> 1) Press “system” button 2 times, until you get to the “scenes” page.
> 2) change “mem” number to the scene you want to use, example “9”. — by turning the lower left encoder.
> 3) turn the lower right encoder “save” clockwise a few times, the arrow above the “save” should move.This should save current settings in memory “9”.(Rotate the corresponding encoder in the direction of the arrow “>”, arrow will move toward the “I”)
Save Several Scenes setting with different memory locations before using recall to check.
b. Load –
1) Press “system” button 2 times, until you get to the “scenes” page.
> 2) change “mem” number to the scene you want to use, example “9”. — by turning the lower left encoder.
> 3) turn the lower middle encoder “Load” clockwise a few times, the arrow above the “Load” should move. This should load what is in memory “9” into current settings.(Rotate the corresponding encoder in the direction of the arrow “>”, arrow will move toward the “I”)
Press the “main” button and double check,
user manual link - http://www.eliteacoustics.com/wp-content/uploads/2019/08/D6-58_Battery_Powered_Acoustic_Amplifier_manual_v101b_2019-3.pdf
more details at www.eliteacoustics.com