Elite Acoustics (EAE) StompMix X6 Six Chan Digital pedalboard mixer with LFP Battery and Bluetooth
69900
Elite Acoustics (EAE) StompMix X6 Six Chan Digital pedalboard mixer with LFP Battery and Bluetooth
69900
The StompMix X6 packed a 32-bit DSP engine to a lightweight and compact stomp box package. The X6 offers a full featured, highly intuitive 6 channels Digital Mixer with a Color Display. The powerful DSP engine provides a compressor, Mid sweepable EQ, Highpass Filter, Notch Filter, Phase reverse to each of the 4 Mic inputs. The X6 features Reverb/Chorus effects processors with dedicated mix bus, an assignable Delay effects processor, and 4 Class A solid-state Mic pre-amps with +48V Phantom power. You will also have the ability to stream and/or mix your Bluetooth inputs from your MP3 player or Phone for backtracking and in between sets music. We added 2 Footswitches allowing instant access to stored scenes for easy and fast setup. The X6 is powered by a rechargeable 3300mAh Lithium Iron Phosphate (LFP) battery for portability, convienence and freedom to be off grid, going to where no Digital Mixer has go on before!
STOMPMIX X6 FEATURES
- 6-Channel Compact Digital Mixer Pedal
- 2 High Z (1M OHM), 4 Mic and 6 Line inputs
- 10 user scene memories
- +48V Phantom Power (*Chan 1/2 and Chan 3/4 have separate switch on StompMIX 6-2)
- Independent Effects on each channel
- Noise Gate, Compressor, EQ, Reverb,
Chorus, Delay, & more - Main MIX (XLR) output EQ
- Main Mix headphone outputs (1/8″ jack)
- Bluetooth *only on Stompmix X6
- Aux input *only on Stompmix 6-2
- MAIN output level controls knob
- Aux output level control knob *only available on Stompmix X6
- Main MIX and AUX MIX
- Main MIX (MUTE) – via Footswitch (*Option AUX MUTE available on StompMix 6-2)
- Scenes Change – via Footswitches.
- Metal chassis
- Panel-mounted POTs/Jacks
- 12V AC supply/ Battery Charger included
- Built-in Rechargeable Lithium Battery *Only on StompMix X6
- Up to 4-6 hours of play time* Only on StompMix X6
- Fast Charging time. *Only on StompMix X6
- Designed and assembled in USA
StompMix X6:
• Dimensions: 7.8”L x 9.8”W x 4.5”H
• Weight: 6 lbs
StompMix 6-2:
Dimensions: 6.58”L x 6.46”W x 4.11”H
Weight: 4 lbs
12V power supply adapter included.
CALIFORNIA PROPOSITION 65 WARNING
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
How to save and recall/Load Scenes.
a. Save –
> 1) Press “system” button 2 times, until you get to the “scenes” page.
> 2) change “mem” number to the scene you want to use, example “9”. — by turning the lower left encoder.
> 3) turn the lower right encoder “save” clockwise a few times, the arrow above the “save” should move.This should save current settings in memory “9”.
(Rotate the corresponding encoder in the direction of the arrow “>”, arrow will move toward the “I”)
Save Several Scenes setting with different memory locations before using recall to check.
b. Load –
1) Press “system” button 2 times, until you get to the “scenes” page.
> 2) change “mem” number to the scene you want to use, example “9”. — by turning the lower left encoder.
> 3) turn the lower middle encoder “Load” clockwise a few times, the arrow above the “Load” should move. This should load what is in memory “9” into current settings.(Rotate the corresponding encoder in the direction of the arrow “>”, arrow will move toward the “I”)
Press the “main” button and double check,